manualshive.com logo in svg

D-Link DGS-3100-48, User Manual

The D-Link DGS-3100-48 is a high-performance switch designed for seamless network connectivity. With its durable construction and advanced features, this product ensures reliable and efficient networking. To get started, download the free user manual from manualshive.com to unleash the full potential of your device.

Share
Download
background image

DGS-3100 Series Gigabit Stackable Managed Switch User Manual 

 

238 

ID SEVERITY 

 

CATEGORY 

MESSAGE DESCRIPTION 

%(2)j: port is 
down/notPresent 

removed and is indicated as 
being down or not present. 

SYSLG8.0.4 Warning IP 

Network IP address %(1)s 
is unavailable 

The IP address was most 
likely allocated statically. 

SYSLG8.1.31 Warning STP 

Active change failed - 
unreachable route not 
added because of Routing 
table overflow 

The message appears when 
topology changes took 
place but the system failed 
to add an entry to the table 
because no memory is 
available. 

SYSLG8.10.14 Warning  bootup 

BOOTP client received 
illegal IP mask in BOOTP 
msg 

The BOOTP client received 
an illegal IP mask in the 
BOOTP message. 

SYSLG8.10.15 Warning  DHCP 

DHCP client received 
illegal IP mask in DHCP 
msg 

The DHCP client received 
an illegal IP mask in DHCP 
message. 

SYSLG8.10.16 Warning  bootup 

BOOTP client received 
illegal IP address in 
BOOTP msg 

The BOOTP client received 
an illegal IP address in the 
BOOTP message. 

SYSLG8.10.17 Warning  DHCP 

DHCP client received 
illegal IP address in 
DHCP msg 

The DHCP client received 
an illegal IP address in the 
DHCP message. 

SYSLG8.10.20 Warning  bootup 

BOOTP msg indicates that 
IP interface and default 
router are not on the same 
subnet 

Error in the BOOTP server 
configuration where the IP 
interface and default router 
are not on the same subnet. 

SYSLG8.10.21 Warning  bootup 

BOOTP msg indicates that 
IP interface and TFTP 
server are not on the same 
subnet 

Error in the BOOTP server 
configuration where the IP 
interface and TFTP server 
are not on the same subnet. 

SYSLG8.10.22 Warning  DHCP 

DHCP msg on interface 
%(1)j indicates that IP 
interface %(2)y and 
default router %(2)y, 
mask %(3)y, are not on 
the same subnet 

Error in the DHCP server 
configuration where the 
specified IP interface and 
specified default router with 
the specified mask are not 
on the same subnet. 

SYSLG8.10.23 Warning  DHCP 

DHCP msg on interface 
%(1)j indicates that 
default router %(2)y, 
mask %(3)y, sent by 
DHCP server %(4)y is 
either a subnet name or a 
broadcast 

Error in the DHCP server 
configuration where the 
specified IP interface and 
specified default router with 
the specified mask are 
broadcast. 

SYSLG8.10.24 Warning  DHCP 

DHCP msg indicates that 
IP interface and TFTP 
server are not on the same 
subnet 

Error in the DHCP server 
configuration where the IP 
interface and TFTP server 
are not on the same subnet. 

SYSLG8.10.25 Warning  bootup 

BOOTP msg indicates that 
file name was configured 
without configuring IP 
address of TFTP server 

A BOOTP message must 
include a TFTP server IP 
address. 

SYSLG8.10.26 Warning  IP 

IP address of TFTP server  The TFTP server IP address 

Summary of Contents for DGS-3100-48






































































































































































































































































































Reviews:

No comments

Related manuals for DGS-3100-48

D-Link SmartPro DGS-1500-20 Reference Manual preview
SmartPro DGS-1500-20
Brand: D-Link Pages: 113
D-Link xStack DGS-3120 Series Cli Reference Manual preview
xStack DGS-3120 Series
Brand: D-Link Pages: 1150
Radial Engineering SW8 Owner'S Manual preview
SW8
Brand: Radial Engineering Pages: 12
BeeSecure BEE-REPEATER Quick Start Manual preview
BEE-REPEATER
Brand: BeeSecure Pages: 35
CZHOON CZH-T287 User Manual preview
CZH-T287
Brand: CZHOON Pages: 4
3Com 3C16710 - OfficeConnect 8/TPM Hub User Manual preview
3C16710 - OfficeConnect 8/TPM Hub
Brand: 3Com Pages: 130
Black Box ServSwitch KV1510A User Manual preview
ServSwitch KV1510A
Brand: Black Box Pages: 16
Key Digital KD-MS4x4G-2 Manual preview
KD-MS4x4G-2
Brand: Key Digital Pages: 20
KBT TPR22-BM Series Installation And Operating Manual preview
TPR22-BM Series
Brand: KBT Pages: 4
Guntermann & Drunck UCON/s Getting Started preview
UCON/s
Brand: Guntermann & Drunck Pages: 8
TP-Link P1201-08 User Manual preview
P1201-08
Brand: TP-Link Pages: 34
Avocent AMX Switch Series Installer/User Manual preview
AMX Switch Series
Brand: Avocent Pages: 236
Pakedge Device & Software SE-8P4 User Manual preview
SE-8P4
Brand: Pakedge Device & Software Pages: 8
Rackmount U-1602 User Manual preview
U-1602
Brand: Rackmount Pages: 17
Rosewill RGS-1016 User Manual preview
RGS-1016
Brand: Rosewill Pages: 9
DeviceWell HDS9326 User Manual preview
HDS9326
Brand: DeviceWell Pages: 32
Veris Industries Hawkeye 909 Installation Manual preview
Hawkeye 909
Brand: Veris Industries Pages: 2
Radiient Select-4 User Manual preview
Select-4
Brand: Radiient Pages: 4

Brands by name

Popular brands

Load more brands