D-Link DGS-3100-48 Page 28 User Manual Download

Page: 28 / 293

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Rebooting the System

The

System Reboot Page

provides a method for selecting one, or all of the units to be rebooted. To reboot the system:

Click

> System Reboot.

The

System Reboot Page

opens:

Figure 0-6. System Reboot Page

The System Reboot Page contains the Select Unit to Reboot field. The possible values are:

Value

Description

All

Reboots all stacking members.

01 - 06

Reboots the specific stack member.

Define the

Select Unit to Reboot

field.

Click

. The selected unit(s) is/are rebooted.

Summary of Contents for DGS-3100-48






































































































































































































































































































Search results

Summary of Contents for DGS-3100-48

Reviews:

Related manuals for DGS-3100-48

Brands by name

Popular brands

D-Link DGS-3100-48, User Manual

Search results

Summary of Contents for DGS-3100-48

Reviews:

Related manuals for DGS-3100-48

Brands by name

Popular brands