D-Link DGS-3100-48 Page 256 User Manual Download

Page: 256 / 293

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

240

ID SEVERITY

CATEGORY

MESSAGE DESCRIPTION

%(1)x%(2)x%(3)x%(4)x(
%(5)x%(6)x%(7)x%(8)x

SYSLG8.10.9 Warning IP

DHCP client received
illegal magic cookie
%(1)x%(2)x%(3)x%(4)x(
%(5)x%(6)x%(7)x%(8)x -
must be
%(1)x%(2)x%(3)x%(4)x(
%(5)x%(6)x%(7)x%(8)x

The 4-byte value of the
received cookie must match
the 4-byte value of the legal
cookie.

SYSLG8.100.11 Warning

DHCP snooping received
illegal magic cookie
%(1)x%(2)x%(3)x%(4)x(
%(5)x%(6)x%(7)x%(8)x -
must be
%(1)x%(2)x%(3)x%(4)x(
%(5)x%(6)x%(7)x%(8)x

The 4-byte value of the
received cookie must match
the 4-byte value of the legal
cookie.

SYSLG8.109.1 Warning

%(1)s@

SYSLG8.16.25 Warning FDB Unexpected

PDU

code

Packet is corrupted and will
be discarded.

SYSLG8.31.2

Warning

AAA

Cannot create a user

A user cannot be
authenticated because of
AAA low resources.

SYSLG8.31.36 Warning AAA

Received unsupported
authentication REPLY
msg status=%(1)u (server
msg: %(2)s)

Received a message
indicating that
authentication method is
unsupported.

SYSLG8.31.37 Warning AAA

Unsupported arguments
for adding received in
authorization RESPONSE
msg: %(1)s

Received a message
indicating the additional
authentication argument is
not supported.

SYSLG8.31.38 Warning AAA

Unsupported arguments
for replacement received
in authorization
RESPONSE msg: %(1)s

Received a message
indicating the replacement
authentication argument is
not supported.

SYSLG8.31.39 Warning AAA

Received unsupported
authentication
RESPONSE msg status =
%(1)u

Received a message
indicating authentication is
not supported.

SYSLG8.31.41 Warning AAA

New %(1)s connection for
user %(2)s, source
%(5)s%(3)y destination
%(5)s%(4)y REJECTED

SYSLG8.31.42 Warning AAA

User %(1)s LOCKED
after unsuccessful login
from %(2)s, source
%(5)s%(3)y destination
%(5)s%(4)y

The specified user ID is
locked after an unsuccessful
login from the specified
source to the specified
destination.

SYSLG8.31.44 Warning AAA

AAA FILE data
corruption occurs. Valid
data ONLY saved

AAA data corruption has
occurred. All valid data has
been saved.

SYSLG8.40.13 Warning Security

%(1)s Packet dropped by
Policy rule no.%(2)s .

The packet is dropped in
accordance with the

Summary of Contents for DGS-3100-48






































































































































































































































































































Search results

Summary of Contents for DGS-3100-48

Reviews:

Related manuals for DGS-3100-48

Brands by name

Popular brands

D-Link DGS-3100-48, User Manual

Search results

Summary of Contents for DGS-3100-48

Reviews:

Related manuals for DGS-3100-48

Brands by name

Popular brands