D-Link DGS-3100-48 Page 105 User Manual Download

Page: 105 / 293

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Field

Description

Disable

— Disables MLD Snooping on the VLAN

Unit

Defines the unit number.

Static Router Ports

Defines the port numbers in the selected unit to be added as static router ports.

Ports

Displays the unit:port numbers defined as static router ports.

Dynamic Router Ports

Displays the port numbers in the selected unit learned as dynamic router ports.

Ports

Displays the unit:port numbers defined as dynamic router ports.

Forbidden Router Ports

Defines the port numbers in the selected unit to be added as forbidden router
ports.

Ports

Displays the unit:port numbers defined as forbidden router ports.

Define the

Done Timer, Host Timeout, Router Timeout, State, Static, Dynamic,

and

Forbidden Router Ports

fields.

Click

. MLD Snooping and Static Router Port Settings are defined, and the device is updated.

Summary of Contents for DGS-3100-48






































































































































































































































































































Search results

Summary of Contents for DGS-3100-48

Reviews:

Related manuals for DGS-3100-48

Brands by name

Popular brands

D-Link DGS-3100-48, User Manual

Search results

Summary of Contents for DGS-3100-48

Reviews:

Related manuals for DGS-3100-48

Brands by name

Popular brands