D-Link DGS-3100-48 Page 181 User Manual Download

Page: 181 / 293

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Define the

Show/Hide

field.

To view the graph as a table, click

View Table

Viewing UMB_cast Packet Statistics

The

UMB_cast(RX) Page

displays the number of UMB cast (Unicast, Multicast and Broadcast) packets received on the

device.

Click

Monitoring > Packets > UMB_cast(RX)

. The

UMB_cast(RX) Page

opens:

Figure 6-6. UMB_cast(RX) Page

The

UMB_cast(RX) Page

contains the following fields:

Field

Description

Unit

Indicates the stacking member for which the UMB_cast packets are displayed.

Port

Indicates the port for which the UMB_cast packets parameters are displayed.

Unicast

Indicates the number of Unicast packets received and transmitted through the device.

Multicast

Indicates the number of Multicast packets received and transmitted through the device.

Broadcast

Indicates the number of Broadcast packets received and transmitted through the device.

Time Interval

Indicates the time interval for which the UMB_cast packets are displayed. The possible field
values are: 1s - 5s, 10s, 15s, 20s, 30s, 40s, 50s, and 60s.

Record Number

Indicates the transmitted record number.

Show/Hide

Displays the packets received information. The possible field values are:

Unicast checked

— Displays the total amount of transmitted Unicast packets.

Multicast checked

— Displays the total amount of transmitted Multicast packets.

Broadcast checked

— Displays the total amount of transmitted Broadcast packets.

Define the

Unit

and

Port

fields.

Click

to load the defined parameters.

165

Summary of Contents for DGS-3100-48






































































































































































































































































































Search results

Summary of Contents for DGS-3100-48

Reviews:

Related manuals for DGS-3100-48

Brands by name

Popular brands

D-Link DGS-3100-48, User Manual

Search results

Summary of Contents for DGS-3100-48

Reviews:

Related manuals for DGS-3100-48

Brands by name

Popular brands