4 Web-based Switch Configuration
D-Link Smart Managed Switch User Manual
6
6
7
7
Figure 4.76 – L2 Functions > LLDP > 802.3 Extension TLV
From Port / To Port:
A consecutive group of ports may be configured starting with the selected port.
MAC/PHY Configuration/Status:
Specifies whether the MAC/PHY Configuration Status is enabled on the
port. The possible field values are:
Enabled –
Enables the MAC/PHY Configuration Status on the port.
Disabled –
Disables the MAC/PHY Configuration Status on the port.
Power via MDI:
Advertises the Power via MDI implementations supported by the port. The possible field
values are:
Enabled –
Enables the Power via MDI configured on the port.
Disabled –
Disables the Power via MDI configured on the port.
Link Aggregation:
Specifies whether the link aggregation is enabled on the port. The possible field values
are:
Enabled –
Enables the link aggregation configured on the port.
Disabled –
Disables the link aggregation configured on the port.
Maximum Frame Size:
Specifies whether the Maximum Frame Size is enabled on the port. The possible
field values are:
Enabled –
Enables the Maximum Frame Size configured on the port.
Disabled –
Disables the Maximum Frame Size configured on the port.
Define these parameter fields. Click the
Apply
button to implement changes made and click
Refresh
to
refresh the table information.
L2 Functions > LLDP > LLDP Management Address Settings
The LLDP Management Address Settings allows the user to set management address which is included in
LLDP information transmitted.
