4 Web-based Switch Configuration
D-Link Smart Managed Switch User Manual
104
Figure 4.131 - Add Access Rule – IPv6 UDP
Source Port:
Specifies the source port.
Source Port Mask:
Defines the range of source IP addresses, relevant to the ACL rules. For example, to set
0 – 15, set mask of FFF0.
Destination Port:
Specifies the destination port.
Destination Port Mask:
Defines the range of destination IP addresses, relevant to the ACL rules. For
example, to set 0 – 15, set mask of FFF0.
Click
Next
button then the ACL profile is added.
•
To define the IPv6 ACL Protocol ID profile:
Select
IPv6 ACL
with
Protocol ID
of
Protocol Type
and
click
Next
button. The updates to show the follows:
