DES-7000/DES-7100 Layer 2 Switch User
’
s Guide
Using the Web-based Management Software
93
Figure 6- 55. Packet Analysis window (Table)
The information is described as follows:
Time Interval
Select the desired setting between
1s
and
60s
, where
“
s
”
stands for seconds.
The default value is one second.
Record Number
Select number of times the Switch will be polled between
20
and
200
. The
default value is
20
.
64
The total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
65-127
The total number of packets (including bad packets) received that were
between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
128
–
255
The total number of packets (including bad packets) received that were
between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
256-511
The total number of packets (including bad packets) received that were
between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
512-1023
The total number of packets (including bad packets) received that were
between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
1024-1518
The total number of packets (including bad packets) received that were
between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
Show/Hide
Check whether or not to display 64, 65-127, 128-255, 256-511, 512-1023, and
1024-1518 packets received.
Clear
Clicking this button clears all statistics counters on this window.
View Table
Clicking this button instructs the Switch to display a table rather than a line
graph.
View Line Chart
Clicking this button instructs the Switch to display a line graph rather than a
table.
The CLI command to view packet size statistics is
show packet ports
.
Summary of Contents for DES-7000 Series
Page 111: ......
