DES-7000/DES-7100 Layer 2 Switch User
’
s Guide
Using the Web-based Management Software
71
Defined Router
Use this to create a list of servers or routers that are allowed to communicate with other ports on the
switch module using VLAN ID and MAC addresses. This will limit communication between ports on a
switch module to only specified servers as defined by VLAN and MAC address. This form of traffic
segmentation is used for security and efficiency.
Figure 6- 25. Defined Router MAC Address Entry Table
VLAN ID
Enter the VID in which the router or server resides.
MAC Address
Specify the router or server by typing its MAC address.
The relevant CLI information can be found in the CLI Reference manual in the section titled Traffic
Segmentation. The commands used to designate a router or server for communication between
segmented ports are
config server-mac-list
,
enable server-mac-check
and
disable
server-mac-check
.
Summary of Contents for DES-7000 Series
Page 111: ......
