DES-7000/DES-7100 Layer 2 Switch User
’
s Guide
Using the Web-based Management Software
80
Trap Manager
The following menu allows the user to specify management stations that will receive authentication
failure messages or other trap messages from the switch. Up to 4 trap managers may be entered.
Figure 6- 37. Trap Receivers Menu
To set up trap receivers, define the following:
Trap Receiving Station
Type in the IP address of the trap recipient, i.e. the IP address of the
management station that will receive traps generated by the switch.
Community String
Type in a string of up to 20 characters used for authentication of users
wanting to receive traps from the switch
’
s SNMP agent.
Status
Choose Valid or Invalid for the string. This is used to temporarily limit
the receipt of traps generated by the switch.
The CLI commands used to manage trap receivers are
create snmp trap_receiver
,
config
snmp trap_receiver
,
delete snmp trap_receiver
,
disable snmp traps
and
enable
snmp traps
.
Summary of Contents for DES-7000 Series
Page 111: ......
