DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
266
config radius add
Purpose
Used to configure the settings the switch will
use to communicate with a Radius server.
Syntax
config radius add <server_index 1-3>
<server_ip> key <passwd 32>
[default|{auth_port <udp_port_number>|
acct_port <udp_port_number>}]
Description
The config radius add command is used to
configure the settings the switch will use to
communicate with a Radius server.
Parameters
<server_index 1-3>
−
Assigns a number to the
current set of Radius server settings. Up to
three groups of Radius server settings can be
entered on the switch.
<server_ip>
−
The IP address of the Radius
server.
key
−
Specifies that a password and encryption
key will be used between the switch and the
Radius server.
<passwd 32>
−
The shared-secret key used by
the Radius server and the switch. Up to 32
characters can be used.
default
−
Returns all of the ports in the range to
their default Radius settings.
auth_port <udp_port_number>
−
The UDP port
number for authentication requests. The default
is 1812.
acct_port <udp_port_number>
−
The UDP port
number for accounting requests. The default is
1813.
Restrictions Only
administrator-level users can issue this
command.
Summary of Contents for DES-3250TG
