D-Link DES-3250TG, Command Line Interface Reference Manual

Page: 282 / 322

DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
282
config access_profile
Purpose Used to configure an access profile on the
switch and to define specific values that will be
used to by the switch to determine if a given
packet should be forwarded or filtered. Masks
entered using the create access_profile
command will be combined, using a logical AND
operation, with the values the switch finds in the
specified frame header fields. Specific values
for the rules are entered using the config
access_profile command, below.
Syntax
config access_profile profile_id <value 1-
255> [add access_id <value 1-255>] [ethernet
{vlan <vlan_name 32>|source_mac
<macaddr>|destination_mac
<macaddr>|802.1 <value 0-7>|ethernet_type
<hex 0x0-0xffff}|ip{vlan
<vlan_name>|source_ip
<ipaddr>|destination_ip <ipaddr>|dscp
<value 0-63>|[icmp {type <value 0-65535>
code <value 0-255>}|igmp {type <value 0-
255>}|tcp {src_port <value 0-65535>|dst_port
<value 0-65535>}| udp {src_port <value 0-
65535>|dst_port <value 0-
65535>}|protocol_id <value 0-255>
{user_define <hex 0x0-0xffffffff>}]}]{priority
<value 0-7> {replace_priority}|replace_dscp
<value 0-63>}|delete <value 1-255>]
Description The config access_profile command is used to
configure an access profile on the switch and to
enter specific values that will be combined,
using a logical AND operation, with masks
entered with the create access_profile
command, above.
Parameters
profile_id <value 1-255>
−