manualshive.com logo in svg

D-Link DES-3250TG, Command Line Interface Reference Manual

Share
Download
D-Link DES-3250TG Command Line Interface Reference Manual Download Page 281

DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide 

281 

 

delete access_profile 

Purpose 

Used to delete a previously created access 
profile. 

Syntax 

delete access_profile [profile_id <value 1-
255>] 

Description 

The delete access_profile

 

command is used to 

delete a previously created access profile on the 
swtich. 

Parameters 

profile_id <value 1-255> 

−

 an integer between 1 

and 255 that is used to identify the access 
profile that will be deleted with this command.  
This value is assigned to the access profile 
when it is created with the create access_profile

 

command. 

Restrictions Only 

administrator-level users can issue this 

command. 

 

Example Usage: 

To delete the access profile with a profile ID of 1: 

 

local> 

local> delete access_profile profile_id 1  

Command: delete access_profile profile_id 1 

Success. 

 

 

 

Summary of Contents for DES-3250TG



































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands