D-Link DES-3250TG, Command Line Interface Reference Manual

Page: 133 / 322

DES-3250TG Layer 2 Fast Ethernet Switch User’s Guide
133
show syslog host
Purpose Used to display the syslog hosts currently
configured on the switch.
Syntax show syslog host {<index 1-4>}
Description The show syslog host command is used to
display the syslog hosts that are currently
configured on the switch.
Parameters
<index 1-4>
−
Specifies that the command will
be applied to an index of hosts. There are four
available indexes, numbered 1 through 4.
Restrictions None.
Example usage:
To show Syslog host information:
local>show syslog host
Command: show syslog host
Syslog Global State: Disabled
Host Id Host IP Address Severiry Facility UDP port Status
------- --------------- -------------- -------- -------- --------
1 10.1.1.2 All Local0 514 Disabled
2 10.40.2.3 All Local0 514 Disabled
3 10.21.13.1 All Local0 514 Disabled
Total Entries : 3
local>