![background image](http://html.mh-extra.com/html/d-link/dcs-7410/dcs-7410_user-manual_77712052.webp)
52
D-Link DCS-7510 User Manual
Section 3 - Configuration
Enable D/O
signal:
Trigger Event:
This enables the D/O to send a signal when there
is a triggered event.
Use the checkboxes to configure the camera to
send a signal through the D/O port whenever
motion is detected, or when a signal is detected
on D/I port 1 or D/I port 2.
SETUP > Digital Output
Digital Output
(
DO
) feature enables you to configure your DO port to send signals whenever certain events occur.
Click
Save Settings
to save your changes, or click
Don’t
Save Settings
to discard your changes.
Summary of Contents for DCS-7410
