D-Link DCS-7410, User Manual

Page: 36 / 67

36 D-Link DCS-7510 User Manual
Section 3 - Configuration
Motion Detection Setup Wizard
This wizard will guide you through a step-by-step process to set up Motion Detection on your IP camera. Click Next
to continue.
Click Next
This step allows you to enable or disable video motion
and control the sensitivity of your camera.
To draw a motion detection zone, select
Draw motion
area , then click and drag your mouse over the areas of
the image you want to monitor for motion detection. You
can select Erase motion area to remove areas, and
you can also enter a
Sensitivity
for motion detection,
where 0% is the least sensitive setting and 100% is the
most sensitive setting. Click
Next
to continue.
Click Next