D-Link DCS-7410, User Manual

Page: 50 / 67

50 D-Link DCS-7510 User Manual
Section 3 - Configuration
SETUP > Snapshot
Snapshot
enables your camera to take snapshots when motion is detected. Snapshots can be sent to an e-mail
address and/or to an FTP server.
Check this box to enable the snapshot feature.
Select one or more events to trigger a snapshot, such as Motion
Detection, D/I Signal 1 and D/I Signal 2.
This will set the camera to take snapshots continuously at
intervals specified in
FTP Server > Interval
below. You
can only save to an FTP server when taking continuous
snapshots.
This will set the camera to take snapshots continuously at
intervals specified in FTP Server > Interval below according
to schedule you define by checking days and entering the
times you want to record between. You can only save to an
FTP server when taking scheduled snapshots.
The camera will send the snapshots to the e-mail address
specified in the following text boxes. If you do not know what
to enter for the User Name , Password , or SMTP Mail Server ,
contact your e-mail service provider for details.
Enter the username or login name for your e-mail
account.
Enter the password for your e-mail account.
Enter the SMTP server for your e-mail account.
Enable
Snapshot:
Event Based:
Continuous
(FTP only):
Scheduled
(FTP only):
E-mail
Address:
User Name:
Password:
SMTP Mail
Server: