![background image](http://html.mh-extra.com/html/d-link/dcs-5029l/dcs-5029l_user-manual_77645039.webp)
39
D-Link DCS-5029L User Manual
39
Section 4 - Configuration
Wireless Setup
Check the box to allow your camera to connect to your network
wirelessly.
Click
Rescan
to scan for an available wireless network. Then click the
drop-down menu to select a wireless network.
Displays the
SSID
(network name) of the wireless network you want
to connect to.
Select the connection mode used by your wireless network. In most
cases, you should select
Infrastructure
.
Ad-Hoc
is only used if your
camera is directly connecting to another PC or device without the use
of a router or access point.
If you are using
Ad-Hoc
mode, select the same channel that is being
used by your wireless network, or select
Auto
.
Select the wireless security mode used by your wireless network.
If you select
WPA-PSK
or
WPA2-PSK
for your authentication type, you
must specify what type of encryption your wireless network uses.
If you select
WPA-PSK
or
WPA2-PSK
for your authentication type,
enter the
Key
(also known as password) for your wireless network.
Click
Save Settings
.
Enable
Wireless:
Site Survey:
SSID:
Wireless Mode:
Channel:
Authentication:
Encryption:
Key:
This section allows you to set up and configure the wireless settings on your camera.