![background image](http://html.mh-extra.com/html/d-link/dcs-5029l/dcs-5029l_user-manual_77645044.webp)
44
D-Link DCS-5029L User Manual
44
Section 4 - Configuration
PTZ Setup
This section allows you to configure the pan and tilt operations for your camera. You can set the lens location for the Home
(+)
button, and specify
up to 24 pre-set points, allowing you to view these pre-determined areas from the Live Video screen. You can also create preset sequences.
Select the increment of movement for each press of a pan (up/down)
arrow on the PTZ Control. (A low number for slower pan speed, and
a high number for a faster pan speed.)
Select the increment of movement for each press of a tilt (left/right)
arrow on the PTZ Control. (A low number for slower tilt speed, and a
high number for a faster tilt speed.)
Select an available number from the drop-down menu for the
preset point you want to create. (Available numbers will be listed as
“nonsetting”.)
Enter a name for your new preset. point Use the PTZ Control to set the
view you want to assign to the preset, and click
Add
. If you select an
existing
Preset Name
from the
Preset List
, you can change the name
by typing in a new name and then clicking
Rename
.
Click on the drop-down menu to view the list of preset points. You
can select a name from this list to
Rename
or
Remove
from the list.
Select a name from the drop-down menu and click
Set
to assign the
selected preset point as the Home
(+)
position.
Select a number from the drop-down menu representing the speed
at which the camera will pan. You can choose a value between 0 and
10, with 0 being the slowest. Click the
Test
button to view the camera
movement at the selected pan speed.
Proceed to the next page for instructions for creating a preset sequence.
Pan Step:
Tilt Step:
Preset No:
Preset Name:
Preset List:
Choose as
Home:
Auto Pan
Speed: