![background image](http://html.mh-extra.com/html/d-link/dcs-5029l/dcs-5029l_user-manual_77645037.webp)
37
D-Link DCS-5029L User Manual
37
Section 4 - Configuration
Network Setup
Select this connection type if you have a DHCP server running on your
network and would like a dynamic IP address to be assigned to your
camera automatically.
Select this connection type if your Internet Service Provider (ISP)
or network administrator has provided you with a static or fixed IP
address and other network information for your camera.
IP Address:
Enter the fixed
IP Address
for your camera.
Subnet Mask:
Enter the
Subnet Mask
for your network. This value
is used to determine if the destination is in the same subnet as host
devices. The default value is
255.255.255.0
.
Default Router:
Enter the address for the gateway used to forward
data to destinations in a different subnet. Invalid gateway settings
may cause the failure of transmissions.
Primary DNS:
Enter the IP address for the primary domain name server
that translates names to IP addresses.
Secondary DNS:
Enter the IP address for the secondary domain name
server to backup the Primary DNS.
Check to enable UPnP settings and allow you to configure your camera
as a UPnP (Universal Plug and Play) device in the network.
If you enable UPnP port forwarding, it will allow the camera to
communicate with a UPnP compatible network router for simplified
local network access and remote access using the Internet.
If your camera is directly connected to the Internet through a DSL
modem, you may
connect to the Internet using PPPoE. Click on
Enable
and enter the
User Name
and
Password
provided to you by your ISP
or network administrator.
Displays the PPPoE status as either
active
or
inactive
.
DHCP:
Static IP Client:
Enable UPnP
presentation:
Enable UPnP Port
Forwarding:
Enable PPPoE
Settings:
PPPoE Status:
This section allows you to configure the network settings for your camera.