manualshive.com logo in svg

D-Link D DXS-3227 DXS-3227, Web/Installation Manual

Share
Download
D-Link D DXS-3227 DXS-3227 Web/Installation Manual Download Page 93

D-Link DXS-3250/DXS-3227P/DXS-3227 User Guide

Page 93 

Configuring Network Security

Network security manages both access control lists and locked ports. This section contains the following topics: 

•

Network Security Overview

•

Defining Network Authentication Properties

•

Defining Port Authentication

•

Configuring Traffic Control

Network Security Overview

This section provides an overview of network security and contains the following topics: 

•

Port-Based Authentication

•

Advanced Port-Based Authentication

Port-Based Authentication

Port-based authentication authenticates users on a per-port basis via an external server. Only authenticated and 
approved system users can transmit and receive data. Ports are authenticated via the RADIUS server using the 

Extensible Authentication Protocol 

(EAP). Port-based authentication includes:

•

Authenticators

 — Specifies the device port which is authenticated before permitting system access.

•

Supplicants

 — Specifies the host connected to the authenticated port requesting to access the system ser-

vices.

•

Authentication Server 

— Specifies the server that performs the authentication on behalf of the authentica-

tor, and indicates whether the supplicant is authorized to access system services. 

Port-based authentication creates two access states:

•

Controlled Access

 — Permits communication between the supplicant and the system, if the supplicant is 

authorized. 

•

Uncontrolled Access

 — Permits uncontrolled communication regardless of the port state.

The device currently supports port-based authentication via RADIUS servers. 

Advanced Port-Based Authentication

Advanced port-based authentication enables multiple hosts to be attached to a single port. Advanced port-based 
authentication requires only one host to be authorized for all hosts to have system access. If the port is unautho-
rized, all attached hosts are denied access to the network.

Advanced port-based authentication also enables user-based authentication. Specific VLANs in the device are 
always available, even if specific ports attached to the VLAN are unauthorized. For example, Voice over IP does 
not require authentication, while data traffic requires authentication. VLANs for which authorization is not required 
can be defined. Unauthenticated VLANs are available to users, even if the ports attached to the VLAN are defined 
as authorized.

Summary of Contents for D DXS-3227 DXS-3227
























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands