D-Link D DXS-3227 DXS-3227 Page 133 Web/Installation Manual Download

Page: 133 / 311

D-Link DXS-3250/DXS-3227P/DXS-3227 User Guide

Page 133

Defining VLAN Protocol Ports

The Protocol Group Page adds interfaces to Protocol groups. To define VLAN protocol ports:

Click

Advaned Setup > VLAN > Protocol Port

. The

VLAN Protocol Port Page

opens.

Figure 80: VLAN Protocol Port Page

The

VLAN Protocol Port Page

contains the following fields:

•

Interface

- Indicates the interfaces to which the protocol group is added. The possible field values are:

•

Port

–

Adds the LAG to the protocol group.

•

Group ID

–

Defines the Protocol group ID to which the interface is added. Protocol group IDs are denied in

the Protocol Group Table.

•

VLAN ID (1-4095)

–

Attaches the interface to a user-defined BLAN ID. The VLAN I is defined on the Create a

New VLAN page. Protocol ports can either be attached to a VLAN ID or a VLAN name.

•

Remove

–

Removes the port assignment from a VLAN or protocol group. The possible field values are:

–

Checked

–

Removes the selected interface from the protocol group.

–

Unchecked

–

Maintains the interface within the protocol group

Click .

The

VLAN Protocol Port Setting Page

opens.

Summary of Contents for D DXS-3227 DXS-3227























































































































































































































































































































Search results

Summary of Contents for D DXS-3227 DXS-3227

Reviews:

Related manuals for D DXS-3227 DXS-3227

Brands by name

Popular brands

D-Link D DXS-3227 DXS-3227, Web/Installation Manual

Search results

Summary of Contents for D DXS-3227 DXS-3227

Reviews:

Related manuals for D DXS-3227 DXS-3227

Brands by name

Popular brands