D-Link D DXS-3227 DXS-3227 Page 217 Web/Installation Manual Download

Page: 217 / 311

D-Link DXS-3250/DXS-3227P/DXS-3227 User Guide

Page 215

Defining SNMP Notification Filters

The

SNMP Notification Filter Page

permits filtering traps based on OIDs. Each OID is linked to a device feature or

a portion of a feature. The

SNMP Notification Filter Page

also allows network managers to filter notifications. To

define SNMP notification filters:

Click

System > SNMP > Notification > Notification Filter

. The

SNMP Notification Filter Page

opens:

Figure 140:SNMP Notification Filter Page

The

SNMP Notification Filter Page

contains the following fields:

•

Filter Name

— Contains a list of user-defined notification filters.

•

Object ID Subtree

— Displays the OID for which notifications are sent or blocked. If a filter is attached to an

OID, traps or informs are generated and sent to the trap recipients. OIDs are selected from either the

Select

from

field or the

Object ID

field.

•

Filter Type

— Indicates whether to send traps or informs relating to the selected OID.

–

Excluded

— Does not send traps or informs.

–

Included

— Sends traps or informs.

•

Remove

— Deletes filters.

–

Checked — Deletes the selected filter.

–

Unchecked — Maintains the list of filters.

Click .

The

Add SNMP Notification Filter Page

opens:

Summary of Contents for D DXS-3227 DXS-3227























































































































































































































































































































Search results

Summary of Contents for D DXS-3227 DXS-3227

Reviews:

Related manuals for D DXS-3227 DXS-3227

Brands by name

Popular brands

D-Link D DXS-3227 DXS-3227, Web/Installation Manual

Search results

Summary of Contents for D DXS-3227 DXS-3227

Reviews:

Related manuals for D DXS-3227 DXS-3227

Brands by name

Popular brands