30
D-Link DAP-3690 User Manual
Section 3 - Configuration
User Limit (0 - 64):
Network Utilization:
Set the maximum amount of users that are allowed access (zero to 64 users).To use this feature, the Connection Limit above
must be enabled. For most users, a limit of
10
is recommended. The default setting is
20
.
Set the maximum utilization of this access point for service. The DAP-3690 will not allow any new clients to associate with the
AP if the utilization exceeds the value the user specifies. Select a utilization percentage between
100%
,
80%
,
60%
,
40%
,
20%
,
or
0%
. When this network utilization threshold is reached, the device will pause one minute to allow network congestion to
dissipate.
Multicast Rate:
Adjust the multicast packet data rate here. The multicast rate is supported in
AP mode
, (2.4 GHZ and 5 GHZ) and
WDS
with AP
mode
, including Multi-SSIDs.
Summary of Contents for AirPremier N DAP-3690
Page 1: ......
