D-Link AirPremier N DAP-3690 User Manual Download Page 68

Page: 68 / 94

D-Link DAP-3690 User Manual

Section 3 - Configuration

Maintenance > Time and Date

Current Time:

Displays the current time and date settings.

NTP Server:

Enter the NTP server IP address.

Time Zone:

Use the drop-down menu to select your correct

Time Zone.

Enable Daylight Saving:

Check the box to Enable Daylight Saving Time.

Set the Date and

Time Manually:

A user can either manually set the time for the

AP here, or click the

Copy Your Computer’s Time

Settings

button to copy the time from the computer

in use (Make sure that the computer’s time is set

correctly).

Daylight Saving Dates:

Use the drop-down menu to select the correct

Daylight Saving offset.

Enable NTP Server:

Check to enable the AP to get system time from an

NTP server.

Summary of Contents for AirPremier N DAP-3690































































































Search results

Summary of Contents for AirPremier N DAP-3690

Reviews:

Related manuals for AirPremier N DAP-3690

Brands by name

Popular brands

D-Link AirPremier N DAP-3690, User Manual

Search results

Summary of Contents for AirPremier N DAP-3690

Reviews:

Related manuals for AirPremier N DAP-3690

Brands by name

Popular brands