D-Link AirPremier N DAP-3690 User Manual Download Page 33

Page: 33 / 94

D-Link DAP-3690 User Manual

Section 3 - Configuration

VLAN Settings > VLAN List

The DAP-3690 supports VLANs. VLANs can be created with a Name and VID. Mgmt (TCP stack), LAN, Primary/Multiple SSID, and WDS connection

can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-3690 without a VLAN tag will have a VLAN tag inserted with

a PVID. Once you have made the desired settings, click the

Save

button to let your changes take effect.

The VLAN List tab displays the current VLANs.

VLAN Status:

Use the radio button to toggle to Enable. Next, go to

the

Add/Edit

VLAN tab to add or modify an item on the

VLAN List tab.

The current VLAN mode is displayed.

VLAN Mode:

Summary of Contents for AirPremier N DAP-3690































































































Search results

Summary of Contents for AirPremier N DAP-3690

Reviews:

Related manuals for AirPremier N DAP-3690

Brands by name

Popular brands

D-Link AirPremier N DAP-3690, User Manual

Search results

Summary of Contents for AirPremier N DAP-3690

Reviews:

Related manuals for AirPremier N DAP-3690

Brands by name

Popular brands