19
D-Link DAP-3690 User Manual
Section 3 - Configuration
WDS mode
In WDS mode, the DAP-3690 wirelessly connects multiple networks, without functioning as a wireless AP. After completing the desired settings,
click the
Save
button to let your changes take effect.
WDS
is selected from the drop-down menu.
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID’s factory default
setting is
dlink
. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
Enable
or
Disable
SSID visibility. Enabling this feature broadcasts
the SSID across the network, thus making it visible to all network
users.
Mode:
Network Name
(SSID):
SSID Visibility:
Wireless Band:
Select either
2.4 GHz
or
5 GHz
from the drop-down menu.
Auto Channel
Selection:
All devices on the network must share the same channel. To
change the channel, use the drop-down menu to make the
desired selection.
Enabling this feature automatically selects the channel that
will provide the best wireless performance. This feature is not
supported in WDS mode.
Channel:
Channel Width:
Allows selection of the channel width you would like to operate
in.
20 MHz
and
Auto 20/40 MHz
allow both 802.11n and
non-802.11n wireless devices on your network when the wireless
mode is Mixed 802.11 b/g/n in 2.4G and Mixed 802.11 a/n in 5G.
802.11n wireless devices are allowed to transmit data using 40
MHz when the channel width is
Auto 20/40 MHz
.
Summary of Contents for AirPremier N DAP-3690
Page 1: ......
