D-Link AirPremier N DAP-3690 User Manual Download Page 13

Page: 13 / 94

D-Link DAP-3690 User Manual

Section 3 - Configuration

Using the Configuration Menu

To configure the DAP-3690, use a computer that is connected to the DAP-3690 with an Ethernet cable (see the

Network Layout diagram

First, disable the “Access the Internet using a proxy server” function. To disable this function, go to

Control Panel > Internet Options > Connections

> LAN Settings

and uncheck the enable box.

Start your web browser program (I.E. Internet Explorer).

Type the IP address and http port of the DAP-3690 in the address field (

http://192.168.0.50

) and press

Enter

. Make sure that the IP addresses of

the DAP-3690 and your computer are in the same subnet.

After the connection is established, you will see the user identification window as shown.

Note:

If you have changed the default IP address assigned to the DAP-3690, make sure to enter the

correct IP address.

Note:

If you have changed the password, make sure to enter the correct password.

•

Type “

admin

” in the User Name field.

•

Leave the Password field blank.

•

Click the

Login

button.

Summary of Contents for AirPremier N DAP-3690































































































Search results

Summary of Contents for AirPremier N DAP-3690

Reviews:

Related manuals for AirPremier N DAP-3690

Brands by name

Popular brands

D-Link AirPremier N DAP-3690, User Manual

Search results

Summary of Contents for AirPremier N DAP-3690

Reviews:

Related manuals for AirPremier N DAP-3690

Brands by name

Popular brands