D-Link AirPremier N DAP-3690 User Manual Download Page 29

Page: 29 / 94

D-Link DAP-3690 User Manual

Section 3 - Configuration

WMM (Wi-Fi

Multimedia):

WMM stands for Wi-Fi Multimedia. Enabling this feature will improve the user experience for audio and video applications

over a Wi-Fi network.

Short GI:

Select

Enable

Disable

. Enabling a short guard interval can increase throughput. However, be aware that it can also increase

the error rate in some installations due to increased sensitivity to radio-frequency installations.

IGMP Snooping:

Select

Enable

Disable

. Internet Group Management Protocol allows the AP to recognize IGMP queries and reports sent

between routers and an IGMP host (wireless STA). When IGMP snooping is enabled, the AP will forward multicast packets to

an IGMP host based on IGMP messages passing through the AP.

This setting determines the power level of the wireless transmission. Transmitting power can be adjusted to eliminate

overlapping of wireless area coverage between two access points where interference is a major concern. For example, if

wireless coverage is intended for half of the area, then select 50% as the option. Use the drop-down menu to select

100%

50%

25%

, or

12.5%

Transmit Power:

Ack Time Out (2.4

GHZ, 48~200) or Ack

Time Out (5 GHZ,

25~200):

To effectively optimize throughput over long distance links enter a value for Acknowledgement Time Out between

and

200

microseconds for 5 GHz or from

200

microseconds in the 2.4 GHz in the field provided.

DTIM Interval

(1-15):

Select a Delivery Traffic Indication Message setting between

and

is the default setting. DTIM is a countdown informing

clients of the next window for listening to broadcast and multicast messages.

Select

Enable

Disable

. This is an option for load balancing. This determines whether to limit the number of users accessing

this device. The exact number is entered in the User Limit field below. This feature allows the user to share the wireless

network traffic and the client using multiple APs. If this function is enabled and when the number of users exceeds this

value, or the network utilization of this AP exceeds the percentage that has been specified, the DAP-3690 will not allow

clients to associate with the AP.

Connection Limit:

Summary of Contents for AirPremier N DAP-3690































































































Search results

Summary of Contents for AirPremier N DAP-3690

Reviews:

Related manuals for AirPremier N DAP-3690

Brands by name

Popular brands

D-Link AirPremier N DAP-3690, User Manual

Search results

Summary of Contents for AirPremier N DAP-3690

Reviews:

Related manuals for AirPremier N DAP-3690

Brands by name

Popular brands