53
D-Link DIR-890L User Manual
Section 4 - Configuration - Router Mode
PPPoE
Select
PPPoE
if your ISP provides and requires you to enter a PPPoE username and password
in order to connect to the Internet.
PPPoE Session:
Choose
Share with IPv4
to reuse your IPv4 PPPoE username and
password, or
Create a new session
.
If you selected
Share with IPv4
configure the following options:
Address Mode:
Select
Static IP
if your ISP assigned you an IP address. In most cases,
select
Dynamic IP
.
IP Address:
Enter the IP address provided by your ISP. (Static IP only)
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
If you selected
Create a new session
,
configure the following options:
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Address Mode:
Select
Static IP
if your ISP assigned you an IP address. In most cases,
select
Dynamic IP
.
IP Address:
Enter the IP address provided by your ISP. (Static IP only)
Service Name:
Enter the ISP service name (optional).
Reconnect Mode:
Select either
Always On
or
Manual
.
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
My Internet Connection is:
PPPoE
⌵
DIR-890L HW:A1
FW:1.10
Settings >> Internet >> IPv6
Settings
Home
Features
Management
IPv4
Save
IPv6
All of your IPv6 Internet and network connection details are displayed on this page.
Address Mode:
Dynamic IP
⌵
MTU:
1492
bytes
PPPoE Session:
Share with IPv4
⌵
PPPoE Session:
Share with IPv4
⌵
Address Mode:
Static IP
⌵
IP Address:
MTU:
1492
bytes
PPPoE Session:
Create a new session
⌵
Username:
Password:
Address Mode:
Static IP
⌵
IP Address:
Service Name:
Reconnect Mode:
Always On
⌵
MTU:
1492
bytes
PPPoE Session:
Create a new session
⌵
Username:
Password:
Address Mode:
Dynamic IP
⌵
Service Name:
Reconnect Mode:
Always On
⌵
MTU:
1492
bytes