D-Link AC3200 Ultra User Manual Download Page 20

Page: 20 / 242

D-Link DIR-890L User Manual

Section 3 - Installation - Router

4. Use the included Ethernet cable to connect your modem to the yellow port labeled

INTERNET

on the router.

5. Turn on or plug your modem back in and wait approximately one minute before proceeding onward.

DIR-890L

Modem

Note:

This unit is to be used with power supply model DA-60N12.

6. Connect the supplied power adapter to the router and a power outlet, press the power button, and verify that the power LED is lit. Allow 1

minute for the router to boot up.

Modem

Hardware Setup (continued)

DIR-890L

Summary of Contents for AC3200 Ultra



















































































































































































































































Search results

Summary of Contents for AC3200 Ultra

Reviews:

Related manuals for AC3200 Ultra

Brands by name

Popular brands

D-Link AC3200 Ultra, User Manual

Search results

Summary of Contents for AC3200 Ultra

Reviews:

Related manuals for AC3200 Ultra

Brands by name

Popular brands