6
Angle Cutting (2)
Insert the siding between the
cutting blade and the base, pull
out the extension bracket, then lift
the supporting rollers as shown
and pull the base of the rollers out,
flush the siding with the guide bar,
hold the siding and press the
handle down to complete a cut.
Warning:
Do not put your fingers
against the sharp edge of the
blade at any time.
Angle Cutting (1)
Insert the siding between the
cutting blade and the base, pull
out the extension bracket, then lift
the supporting rollers as shown
and pull the base of the rollers
out, flush the siding with the
guide bar, hold the siding and
press the handle down to
complete a cut.
Warning:
Do not put your fingers
against the sharp edge of the
blade at any time.
Straight Cutting
Insert the siding between the
cutting blade and the base, pull
out the extension bracket, then
flush the siding with the guide bar
on one side of the rollers, hold the
siding and pull handle down to
complete a cut.
Note:
the flat side of the blade
should face the supporting rollers.
Warning:
Do not put your fingers
against the sharp edge of the
blade at any time.
