3
15.
CUTTING AND C
Assembly of the cutter (1)
Unfold the legs by press the
handles on each leg as shown.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.
Assembly of the cutter (3)
Insert the spin rod as shown from
the bottom of the supporting
plate and use provided spacer
and nut to lock the spin rod in
position.
Warning:
Do not put your fingers
against the sharp edge of the
blade at any time.
Assembly of the cutter (2)
Have the cutting head sit on
the supporting steel plate.
Note:
the supporting plate
sticks out on the same side with
the D-Cut logo shown on the
blade holder. Insert 4 long
screws from other side the
cutting head and use 4 nuts to
tighten the supporting plate.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.
