5
Assembly of the cutter (7)
Use provided spacer and nut to
tighten the cutting head and
supporting plate in position. But
do not over tighten it.
Warning:
Do not put your
fingers against the sharp edge of
the blade at any time.
Assembly of the cutter (8)
Install the wheels with included
screws as shown.
Warning:
Do not put your
fingers against the sharp edge of
the blade at any time.
Assembly of the cutter (9)
Install the cutting handle as
shown by pulling up the pin at
the end of the handle.
Warning:
Do not put your
fingers against the sharp edge of
the blade at any time.
