7
Transport
Fold 4 legs as shown and
use the lock pins firmly locked
the cutting head, then carry the
handle as shown.
Changing the Blade
Use provided Allen wrench to
remove the eight screws, then
carefully move the blade out of
the small blade holder.
Note:
the flat side of the blade
facing the table when installing
a new blade.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.
Changing the Nylon Bar
Use provided Allen wrench to
remove the nine screws, then
carefully move the nylon bar out
of the small blade holder.
Warning:
Do not put your
fingers against the sharp edge of
the blade at any time.
