x.sight - software manual
8 |
P a g e
3
Software overview
The x.sight will come up with a single application desktop software preinstalled and ready
to be used on the embedded PC. This chapter will introduce the User Interface (UI) and
the handling of software together with hardware required user actions as well as explain
the full software functionality in detail.
Hint: Some of the software functions and buttons described in this manual may
not be available on your device. This depends on the configuration and device
type you have. For any question, please contact technical support.
3.1 General handling
The software contains four main tabs:
LOAD
,
SETTINGS
,
DROPLET-QC
and
DISPENSE
.
In order to complete the setup process and print a plate, you have to work through these
four tabs from left to right.
The active tab is highlighted in blue, like in the above example the
LOAD
tab. The non-
active tabs are grey. The following sections explain the single tabs and the options and
buttons on their respective UI pages.
3.2 Start screen (LOAD)
Start the software by using the link on the desktop. After the boot sequence is completed,
the LOAD / start screen appears.
