CY3210-PSoCEVAL1 PSoC® 1 Evaluation Kit Guide, Doc. #: 001-66768 Rev. *F
67
Code Examples
5.6.2
Hardware Connections
■
Connect P20 to LED1
Figure 5-54. Hardware Connection: Code Example 6
5.6.3
Code Example 6 Flowchart
5.6.4
Verifying Output
After the program is built and programmed into the device, make all the hardware connections and
reset the board by either pressing the
RESET
button or by power cycling the board. The LED1 blinks
at a frequency of 1.4 Hz.
Note
Remove jumper JP3 to verify output at 5 V.
Enable PWM1 and PWM2
Blink LED
