CY3210-PSoCEVAL1 PSoC® 1 Evaluation Kit Guide, Doc. #: 001-66768 Rev. *F
65
Code Examples
5.5.4
Verifying Output
Program the board with the hex file; disconnect power and make all hardware connections. Remove
the LCD module and power the board. When the switch is released, the PWM configuration is
loaded and LED1 and LED2 blink with PWM Pulse Width and PWM Terminal Count, respectively.
When the switch is pressed, the PRS configuration is loaded and LED1 and LED3 blinks with PRS
Pulse Density and PRS Bitstream, respectively.
Note
Remove jumper JP3 to verify output at 5 V.
Figure 5-52. Verify Output: Code Example 5
