CY3210-PSoCEVAL1 PSoC® 1 Evaluation Kit Guide, Doc. #: 001-66768 Rev. *F
39
Code Examples
Figure 5-14. LCD User Module Placement
18.In the User Modules window, expand the
Digital Comm
folder and double-click on
UART
to
place a UART in the design. Configure the properties of the UART UM, as shown in
Figure 5-15. UART User Module Properties
19.Route the RX signal of UART to P1[6]. There are two methods to do this:
a. Auto Routing: While holding the
[Shift]
key on the keyboard, click on the
RX Input
terminal.
PSoC Designer highlights the available pins/terminals to which routing is possible. Without
releasing the [Shift] key, click on the
Port_1_6
pin on the left. The Row and Column intercon-
nects are automatically configured to connect the selected terminals.
