CY3210-PSoCEVAL1 PSoC® 1 Evaluation Kit Guide, Doc. #: 001-66768 Rev. *F
18
2.3
PSoC Programmer
This section gives a brief introduction on programming PSoC; for kit specific programming instruc-
tion, see
Programming Specifications and Connections on page 20
.
1. Click
Start > All Programs > Cypress > PSoC Programmer <version> > PSoC Programmer
<version>
.
2. Select the MiniProg from
Port Selection
.
Figure 2-8. PSoC Programmer Window
3. Click the
File Load
button to load the hex file.
4. Use the
Program
button to program the hex file on to the chip.
5. When programming is successful, the “Programming Succeeded” message appears in the Action
pane.
6. Close PSoC Programmer.
Note
For more details on PSoC Programmer, see the user guide at the following location:
<Install_directory>\Cypress\Programmer\<version>\Documents
2.
