CY3210-PSoCEVAL1 PSoC® 1 Evaluation Kit Guide, Doc. #: 001-66768 Rev. *F
36
Code Examples
Figure 5-8. ADCINC User Module Placement
12.Configure the ADCINC_1 properties, as shown in
Figure 5-9. ADCINC User Module Properties
13.In the User Modules window, expand the
Amplifiers
folder and double-click on
PGA
to place a
programmable gain amplifier (PGA) in the design.
14.By default, the PGA is placed on the ACB00 analog block. To change the placement to ACB01
analog block, click on the
Next Allowed Placement
icon (see
).
Note
Move the PGA User Module to a block above the ADCINC UM. This is because, the input
to the ADCINC UM is routed through a PGA.
