CY3210-PSoCEVAL1 PSoC® 1 Evaluation Kit Guide, Doc. #: 001-66768 Rev. *F
38
Code Examples
Figure 5-12. Connecting PGA to Port Pin
17.In the User Modules window, expand the
Misc Digital
folder and double-click on
LCD
to place an
LCD in the design. Configure the properties of the LCD UM. Enable the
BarGraph
property to
include additional APIs into the project and allow the bar graph display on the LCD.
Figure 5-13. LCD User Module Properties
Notes
a. This UM does not use digital or analog blocks. On mapping the LCD to a port, it can be
viewed in the design, as shown in
.
b. The LCD module can be placed on ports 0, 1, or 2. Port 2 is selected because some of the
port pins of port 0 and port 1 have other uses.
