CY3210-PSoCEVAL1 PSoC® 1 Evaluation Kit Guide, Doc. #: 001-66768 Rev. *F
41
Code Examples
Figure 5-18. Configure Row_0_Input_2 to GlobalInOdd_6
21.Click on
GlobalInOdd_6
. Select
Port_1_6
from the drop-down list in the Pin field; click
OK
.
Figure 5-19. Pin Select
Figure 5-20. Pin Select
22.Route the TX signal of UART to P2[7]. There are two methods to do this:
a. Auto Routing: Press the
[Shift]
key on the keyboard and click on the
TX Output
terminal.
Without releasing the [Shift] key, click on the
Port_2_7
pin on the right hand side.
