Cypress CYW954907AEVAL1F, User Manual, Page: 40 / 67

CYW954907AEVAL1F Evaluation Kit User Guide, Doc. No. 002-22338 Rev. ** 40
Hardware
4.8.2 Arduino-Compatible Headers
J9, J13, J12 and J10 are the Arduino headers available in the CYW954907AEVAL1F EVK. Table 4-8
shows the pinout of the Arduino Header. Note the following points while connecting an Arduino
shield to the board:
■
5V pin of Header (J9) is not connected to the board.
■
The maximum current that an Arduino shield can sink from the board depends on the application
that is running. In general, 100 mA is the worst-case scenario.
■
The Arduino Analog reference is connected to the 3V3 (3.3V) power supply through R21 which is
not populated by default. In other words, the analog reference is not driven by default.
■
An external ADC attached to CYW54907 helps to achieve Analog functionality on the Arduino
headers.
Table 4-8. Arduino Header Pinout
Eval Board
Header
CYW54907 Pin
Name/ Kit
Signal Name
ARDUINO Header
Name
WICED
Enumeration
Alternate
Enumeration
J10.1 GPIO_0 D0 N/A
J10.2 GPIO_1 D1 N/A
J10.3 GPIO_13 D2 N/A
J10.4 GPIO_7 D3 WICED_PWM_6
J10.5 GPIO_14 D4 N/A
J10.6 GPIO_16 D5 WICED_PWM_3
J10.7 GPIO_15 D6 WICED_PWM_4
J10.8 I2S0_SD_IN D7 WICED_I2S_1
J12.1 I2S1_SD_IN D8 WICED_I2S_3
J12.2 PWM_4 D9 WICED_PWM_5
J12.3 GPIO_11 D10 WICED_PWM_2
J12.4 GPIO_10 D11 WICED_PWM_1
J12.5 GPIO_12 D12 N/A
J12.6 GPIO_9 D13 WICED_LED2
J12.7 GND GND N/A
J12.8 ARD_AREF AREF N/A
J12.9 I2C_1_SDA SDA WICED_I2C_2
J12.10 I2C_1_SCL SCL WICED_I2C_2
J13.1 ARD_AD0 A0 N/A
J13.2 ARD_AD1 A1 N/A
J13.3 ARD_AD2 A2 N/A
J13.4 ARD_AD3 A3 N/A
J13.5 ARD_AD4_SDA A4 N/A
J13.6 ARD_AD5_SCL A5 N/A
J9.1 NC NC N/A
J9.2 ARD_IOREF IOREF N/A
J9.3 ARD_RESET RESET N/A
J9.4 3V3 3.3V N/A