CYW954907AEVAL1F Evaluation Kit User Guide, Doc. No. 002-22338 Rev. **
27
Kit Operation
Figure 3-8. Placing Breakpoint in Code
7. If Breakpoints are created prior to starting the current Debug session, they will not be associated
with the current thread and will be indicated with a Blue circle without a check mark. To enable
the Breakpoints in the current thread, associate the properties from the Breakpoints window with
the current thread.
Note
: If you do not see any breakpoints in the Breakpoints window, click the
Show Breakpoints
Supported by Selected Target
icon as shown in
Figure 3-9
. The breakpoints are displayed.
8. Right-click the desired breakpoint checkbox and click
Breakpoint Properties
…. Click the
last_built.elf check box, as shown in
Figure 3-10
. The check mark appears before the actual
breakpoint indicating its association with the current execution.