Appendix
CY8CKIT-044 PSoC® 4 M-Series Pioneer Kit Guide, Doc. No. 001-96598 Rev. *C
54
A.3.14 Raspberry Pi Compatible Header
The PSoC 4 M-Series Pioneer Kit has a Raspberry Pi compatible header (marked
14
in
Figure A-15
). This header (
J15
) is
not populated by default.
Refer to the “No Load Components” section of the
Bill of Materials
for the header part number.
Alternately, you may use the header from Samtec Inc. (part number:
ESQ-113-44-G-D
). All the serial communication pins
are brought onto this header. Note that GPIO pins of the Raspberry Pi are not connected to the PSoC 4 M-Series Pioneer
Kit using this interface.
The Raspberry Pi pins are intolerant to voltages above 3.3 V. A level translator is included on the board to automatically
convert the digital logic voltages to the 3.3-V domain regardless of the power settings on the PSoC 4 M-Series Pioneer Kit.
Figure A-22. PSoC 4 M-Series Pioneer Kit Connected to a Raspberry Pi Model B
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
