Example Projects
CY8CKIT-044 PSoC® 4 M-Series Pioneer Kit Guide, Doc. No. 001-96598 Rev. *C
23
4. Example Projects
The CY8CKIT-044 PSoC 4 M-Series Pioneer Kit includes six example projects. This chapter explains how to use these
example projects.
4.1 Using the Kit Example Projects
To access the example projects, download and install the CY8CKIT-044 PSoC 4 M-Series Pioneer Kit setup file from the kit
web page
. After installation, the example projects are available in the
Firmware
folder in the installation directory.
Follow these steps to open and use the example projects.
1. Launch PSoC Creator from
Start
>
All Programs
>
Cypress
>
PSoC Creator <version>
>
PSoC Creator <version>
.
2. On the Start page, click
CY8CKIT-044
under
Examples and Kits
>
Kits
. A list of example projects appears, as shown
in
Figure 4-1
.
3. Click on the desired example project, select a location to save the project and click
OK
.
Figure 4-1. Open Example Project from PSoC Creator
4. Build the example project by choosing
Build
>
Build
<Project Name>
. A
.hex
file is generated after the build process.
5. Connect the PSoC 4 M-Series Pioneer Kit to the PC using the USB cable connected to connector J6 as shown in
Figure 3-4
, to program the kit with this example project.
6. Choose
Debug
>
Program
in PSoC Creator.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
