PSoC® 4100S Pioneer Kit Guide, Doc. # 002-14067 Rev. *C
5
1.
Introduction
Thank you for your interest in the CY8CKIT-041-41XX PSoC
®
4100S Pioneer Kit. This kit enables
you to evaluate and develop your application using the PSoC 4100S device family.
The PSoC 4100S device family is an expansion to the PSoC 4 device family. PSoC 4100S is a true
programmable embedded system-on-chip, integrating custom analog and digital peripheral
functions, memory, and an ARM
®
Cortex
®
-M0+ microcontroller on a single chip. The programmable
analog and digital peripheral functions allow higher flexibility, in-field tuning of the design, and faster
time-to-market.
The PSoC 4100S Pioneer Kit offers footprint-compatibility with Arduino™ shields. This kit features a
CapSense
®
trackpad, two CapSense buttons, a CapSense proximity sensor that allows you to
evaluate Cypress’s fourth-generation CapSense technology, an RGB LED, two user-configurable
push-button switches, potentiometer, an onboard programmer/debugger with USB-UART/I2C bridge
functionality block (KitProg2), a Cypress F-RAM™, an EZ-BLE™ PRoC™ Module, and a
rechargeable battery. This kit supports operating voltages of 1.9 V, 3 V (battery), 3.3 V ,or 5 V.
You will use PSoC Creator™ to develop and debug the PSoC 4100S device projects. PSoC Creator
is Cypress’s standard integrated design environment (IDE). If you are new to PSoC Creator, see the
documentation on the
PSoC Creator webpage
. You can also refer to application note
AN79953 –
Getting Started with PSoC 4
, which gives an introduction to the PSoC 4 device.
1.1
Kit Contents
The CY8CKIT-041-41XX PSoC 4100S Pioneer Kit contains the following, as shown in
Figure 1-1
.
■
PSoC 4100S Pioneer Kit
■
USB Standard-A to Micro-B cable
■
Water dropper
■
Four press-fit connectors (one 8×2, one 10×1, two 8×1)
■
Four jumper wires
■
Quick Start Guide
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
