PSoC® 4100S Pioneer Kit Guide, Doc. # 002-14067 Rev. *C
26
Kit Operation
3.1.1
How to Open the Kit Case
The kit comes with a case that houses an FR4 board called the PSoC 4100S Pioneer board (main
board) and a Flex PCB. The following steps show how to open the case.
1. Pull out the bottom case by inserting the finger or a sharp edge object (e.g. a plectrum) in the
notch provided, as shown in
Figure 3-6
.
Note:
Do not use your nails to remove the kit case.
Figure 3-6. Opening the Bottom Case
2. Remove the bottom case by gradually pulling along the edge of bottom case, as shown in
Figure 3-7
.
Figure 3-7. Removing the Bottom Case
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
