CYP IP-7000TXWP, Operation Manual, Page: 38 / 52

33
COMMAND
Description and Parameters
get_serial_bits

Show the current number of serial data bits.
set_serial_parity N1

Set the serial parity bit.
Available values for
N1 :
0 [None]
1 [Odd]
2 [Even]
get_serial_parity

Show the current serial parity bit value.
set_serial_stop N1

Set the serial stop bits.
Available values for
N1 :
0 [1 bit]
1 [2 bits]
get_serial_stop

Show the current number of serial stop bits.
Note: Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.